8 Home Inspection Questions Buyers Ask After Reading Your Report


When a buyer asks, “Is this a big deal?” he usually wants help understanding what the report says and what to do next. He may also be asking you to make a decision that belongs to him, a contractor, or another specialist.

You can be helpful without stepping outside your role. Keep your answer tied to what you observed, explain what remains uncertain, and give a clear next step when one fits the agreement and standard you follow.

Home inspector shows a buyer a roof flashing photo on a tablet while answering a question outside the home
A clear answer points the buyer back to the report, the evidence, and the right next question.

Here are eight questions inspectors commonly hear, along with ways to answer them in plain language. These are starting points, not scripts to repeat without checking the specific report and local requirements.

For help drafting report comments in the first place, read Home Inspection Reports: AI Prompts for Clear, Careful Findings. The Home Inspector Report Prompts book includes reusable prompts for notes, summaries, and report review.

1. “Does this report list every problem in the house?”

A useful answer: “The report covers the systems and areas included in our agreement and standard. It describes what was visible and accessible during the inspection. It is not a guarantee that every condition has been found.”

Then point the buyer to the scope section and any limitations recorded for this property. Do not rely on a generic disclaimer as your only explanation. If a particular area was blocked or a system was not operated, explain that specific limitation.

ASHI and InterNACHI both describe limits in their published standards. ASHI’s current standard focuses on readily accessible, visually observable components, while InterNACHI’s residential standard describes a non-invasive inspection and notes that concealed conditions may not be identified. The applicable standard may differ by inspector and location, so show the client the one you use.

2. “Is this finding serious?”

A useful answer: “I can explain what I observed and why the report recommends follow-up. I can’t make the purchase decision for you. The next step is to have the appropriate professional evaluate it if you need a repair scope or cost.”

If the report describes a safety concern, explain the observed facts and the action the report recommends. Avoid making the answer more dramatic or less urgent than the written finding. If the report category uses labels such as “major” or “safety,” clarify what those terms mean in your own report system.

A buyer may be anxious, especially during a short contingency period. Stay calm, answer what the record supports, and help him identify the next question to ask. Do not give a blanket “it’s fine” or “walk away” based on a limited inspection.

3. “Can you tell me what caused this stain or crack?”

A useful answer: “I documented the visible stain at that location. I did not determine its source during this inspection. The report recommends further evaluation if you want to know whether there is an active issue or concealed damage.”

Sometimes the cause is clear within your professional judgment and the evidence. Sometimes it is not. Do not convert a possibility into a diagnosis just because the buyer asks a direct question. A clear answer distinguishes the condition you observed from the cause you did not establish.

If the client wants a more definite answer, tell him what kind of evaluation could answer it. That is more useful than guessing. For example, a qualified roofing contractor or plumber may need to examine the area, depending on the observed condition.

4. “Does this mean the house is out of code?”

A useful answer: “The inspection was not a code-compliance review. I can explain what I observed and what the report says. A code question should go to the local building department or a qualified professional who can assess the specific work and rules.”

Use this only if it matches your scope and standard. Some inspectors provide additional services or have qualifications for specific evaluations. Make that scope clear before drawing a conclusion. A general inspection should not casually become a permit history search or a code certification.

If the buyer asks whether an older installation was allowed when installed, that may require dates, permits, local rules, and technical knowledge beyond your report. Avoid guessing from appearance alone.

5. “How much will this repair cost?”

A useful answer: “I don’t estimate repair costs in this inspection. The report identifies the condition and the recommended next step. A contractor can inspect it and provide pricing for the work.”

Prices depend on access, materials, local labor, hidden conditions, and the repair chosen. A figure from memory can mislead the client and distract from the actual finding. If your business offers a separate cost-estimating service and you are qualified, describe that service and its limits separately.

6. “Should I ask the seller to fix it?”

A useful answer: “That is a decision for you and your real estate adviser. I can clarify the observation and recommendation in the report. If you want a repair scope, have a qualified contractor evaluate the condition.”

Inspectors should not negotiate the transaction for the buyer. Keep the conversation anchored in the report. If the buyer has misunderstood a sentence, explain the words and point to the photo or limitation that supports it. Let the client decide how to use that information in the purchase process.

7. “Can you come back after the repair?”

A useful answer: “We can discuss whether a separate follow-up visit is available and what it would cover. A reinspection would be limited to the agreed scope and visible conditions at that visit.”

Do not assume that a future visit is included in the original engagement. If you do offer it, define the service, fee, access requirements, and limits in advance. A visual follow-up is not automatically a warranty that the repair will perform indefinitely or that related concealed conditions were resolved.

8. “Can you put that in writing?”

A useful answer: “The report is the written record of the inspection. I can clarify what a comment means and correct an error if I find one. I won’t add a conclusion that the inspection did not establish.”

If you send a follow-up email, keep it consistent with the report and retain it in the job file. Do not casually revise the meaning of a finding in a text message. If an actual error needs correction, use your normal process for an amended report or documented addendum.

Answer with a simple three-part pattern

When you are put on the spot, use three steps:

  1. Return to the evidence: “The report says we observed…”
  2. Name the limit: “We did not determine…” or “That area was not accessible…”
  3. Give the next step: “If you need that answer, ask [appropriate professional] to evaluate…”

This keeps the conversation grounded and gives the buyer a way forward. If you are unsure how to respond, pause and check the report or your notes. A short delay is better than a quick answer you cannot support.

Use AI to prepare, then answer in your own words

AI can help your team draft a plain-language explanation of a report comment. Keep client information private and share only material your policy allows. Review the result against the report before using it.

“Using only the report comment below, draft a brief, calm explanation for a home buyer. Do not add a diagnosis, cause, code conclusion, severity rating, repair cost, purchase advice, or guarantee. State what was observed, what remains unknown, and the next step already recommended in the comment. Flag any question that needs the inspector to review the file. Comment: [paste de-identified text].”

Never send an AI response straight to a client without review. A tool can make a tentative condition sound certain. It can also add advice that no one on your team intended to give.

Keep answers consistent with the report

A good verbal explanation should make the report easier to understand, not create a second version of it. After a call, note any material clarification in the job record. If the written report is wrong or missing a relevant detail, correct it using your normal process.

For report wording that buyers can follow, see 7 Home Inspection Report Mistakes That Leave Buyers Guessing. For a repeatable process from field notes through delivery, read From Site Notes to Final Report: A Home Inspector Workflow. For reusable working sheets and review lists, see Home Inspection Templates for Notes, Photos, and Report Review. The Home Inspector Report Prompts book can help you adapt these steps to your own operation.

ASHI’s current Standard of Practice and InterNACHI’s residential inspection standard are useful references for understanding scope and reporting duties. Their standards are not identical, and neither replaces the requirements that apply to your business. ASHI says its current standard remains in effect until an implementation date for the approved revision is announced.

Frequently asked questions

Does a home inspection report list every problem in a house?

No general inspection should be presented as a guarantee that every issue has been found. Explain the inspection scope, accessible areas, and any specific limitation recorded for this property.

Can a home inspector tell me what caused a stain or crack?

Only if the cause was determined within the inspector’s qualifications, evidence, and scope. Otherwise, describe the condition and explain what follow-up could clarify it.

Does a home inspection confirm code compliance?

Do not assume that it does. Check the agreement, standard, and applicable local requirements. A code question may need a separate assessment.

Should the report say whether I should buy the home?

The report records findings within the inspection scope. The buyer makes the purchase decision, using the report and any other advice he chooses to seek.

What if the buyer wants a repair cost?

Refer him to a qualified contractor unless cost estimating is an appropriate, qualified, and clearly defined part of your own service.

Leave a Comment

Item added to cart.
0 items - $0.00