
Quick answer
When a restoration scope comes back with questions, first identify the contract, estimate version, and exact line the reviewer means. Then match that line to the room, quantity, and field record. Ask for the applicable process when the request is unclear. A review question is not automatically a coverage decision or a promise of payment.
Restoration project managers often have to answer a reviewer while the crew is still working. That is a tough moment to guess what the other person wants. A short, specific question usually gets you further than a long email that mixes scope, price, safety, and coverage.
Use the questions below to get the file back into focus. Some answers come from your own job record. Others depend on the written program agreement, the insurer, or the law in the state where the property sits.
In this article, TPA means a third-party administrator or program vendor involved in managing a restoration assignment. Those roles vary. Check the agreement instead of relying on the acronym alone. This article is general information, not legal or insurance advice.
Eight questions to ask before you resubmit
1. Is the reviewer asking about scope, documentation, pricing, or coverage?
Ask the reviewer to identify the category and the exact line, document, or rule involved. “Please clarify what part of line 12 needs support” is better than “Why did you cut the estimate?” The answer may be about quantity, missing photos, program pricing, or a separate coverage question.
Keep those issues separate in your response. A contractor can explain observed conditions and work performed. The insurer decides policy coverage. A program vendor may apply its own contract requirements. If you cannot tell which role the person is acting in, ask who owns the decision and where the governing instruction is written.
2. What does “TPA review” mean on this assignment?
The term may describe a claims administrator, a vendor network, or a program coordinator. It does not tell you by itself who can authorize work, approve an estimate, or issue payment. Review the assignment, work authorization, and service agreement for the names and responsibilities.
Make a small contact list that names the customer, insurer contact, program reviewer, payment contact, and any other party. Add the preferred channel for approvals. A person who reviews a scope may not be the same person who can authorize a change or explain a payment hold.
3. What records support the line the reviewer questioned?
Start with the actual record that supports the task: a dated field note, labeled photo, measurement, instrument reading, equipment log, authorization, or change request. Write down the file name and page number. If the task depends on a technical standard or product instruction, identify the version you used and ask a qualified person to confirm it applies.
Do not attach unrelated material to make the packet look bigger. A smaller index with four relevant records helps more than 40 unlabeled photos. Keep originals intact. If you need to label or crop a working copy, identify it as an edited copy and preserve the source.
4. What should I do when the reviewer reduces a quantity?
Compare the revised estimate to the version you submitted. Confirm the room, surface, units, and math. If you have a field measurement or sketch, point to it. If you do not, do not recreate a measurement from memory and present it as if it were taken on site.
Ask which measurement or program rule the reviewer used if the difference is still unclear. Keep your reply neutral. The task is to understand the change and identify the evidence, not to argue about a number before you know what changed.
5. How should I document work discovered after opening a surface?
Record when the condition appeared, where it is, who observed it, what was visible, and what action is proposed. Include a wide photo for location and a closer view for detail when appropriate. Add the measurement or test record that supports the requested scope.
Follow the agreement’s change-approval process. A photo of a newly visible condition does not by itself show that a reviewer approved the added work. If immediate work is needed for safety or property protection, follow your company procedure and contract instructions, then document the facts and notification.
6. What if the review note mentions payment?
Check the invoice number, estimate revision, amount, date, prior payment, credit, and any requested correction. Ask the payment contact to name the missing record or specific mismatch. Save the invoice and confirmation from the portal or other submission channel.
Do not tell the customer that the insurer or program will pay unless that party has said so in writing. Payment responsibilities can depend on the customer contract, insurer decision, program agreement, and applicable law. If the contract is disputed, ask a lawyer or qualified advisor to review it.
7. Can AI help me answer the reviewer?
It can help make a response table, compare estimate versions, or identify a missing date. It may also make a technical guess sound certain. Give it only the records it is allowed to see, and require a source for every statement.
Using only the reviewer’s message, the signed authorization, the two estimate versions, and the records I provide, list each open question. For each one, show the exact line or location, the record that supports the answer, any mismatch, and one neutral follow-up question. Do not infer cause, coverage, approval, price-list rules, or legal rights. Mark unsupported statements “not shown in these records.” Do not include customer names, addresses, policy numbers, or payment information.
Have an employee check the result against the originals. Keep the AI output out of the official file unless your company has approved the tool and the process. Never let a chatbot decide whether a claim is covered or a contractor may negotiate it.
8. When should I involve the customer’s advisor or a lawyer?
Bring in qualified help when the question is about policy coverage, claim settlement, a contract right, a legal deadline, a licensing rule, or a substantial payment dispute. If the issue is simply a missing measurement or unclear photo label, your project manager may be able to resolve it from the file.
Some states restrict contractors from acting as public adjusters while also repairing the property. Texas is one example: its Department of Insurance warns contractors not to negotiate a policyholder’s claim or represent the customer on coverage when they are also doing the work. That is Texas-specific. Check the law for the state where the job is located.
A simple review table
| Reviewer’s question | Record to check | What we can say | Next action |
|---|---|---|---|
| [Exact request] | [File, date, page or photo ID] | [Verified fact] | [Owner and due date] |
| [Exact request] | [File, date, page or photo ID] | [Verified fact] | [Owner and due date] |
| [Exact request] | [File, date, page or photo ID] | [Not in file or unresolved] | [Person to ask] |
This table keeps your response honest. When you cannot answer from the records, the next step is to ask for guidance or gather new evidence. Do not write a new record as though it existed during the job.
Keep the words in the “What we can say” column narrow. “The photo was taken on November 4 in the west bedroom” is a checkable fact if the source file shows that date and room. “The insurer should pay for this because the wall was wet” combines an observation with a coverage conclusion. Send the first kind of statement with its source. Ask the appropriate professional about the second.
If a program has a response window, use the date and method written in the agreement or portal instructions. Keep the submission confirmation. Do not infer a deadline from an old job, another program, or an AI answer.
Fictional example: the reviewer asks for a location
Bayview Restoration sends an estimate for a second-floor unit. The program reviewer asks where a photo of a wet ceiling was taken. The photo file is named “IMG_2144,” and the field notes say “bedroom.” There are two bedrooms in the unit.
The project manager does not guess. She checks the original file, the room sketch, and the field lead’s contemporaneous note. The evidence identifies the smaller bedroom, so she updates the photo index with that location and links the photo to the estimate line. The team saves the original and the corrected index. It sends a short reply and asks whether that resolves the location question.
The reviewer later asks about a separate scope item. The project manager opens a new row rather than folding it into the first one. The file now shows what was asked, what the team provided, and what remains open.
Before you press send
- Are you using the right job and estimate version?
- Does each answer address a specific reviewer question?
- Can the reader find the supporting record by its name or page?
- Are observations clearly separated from opinions or conclusions?
- Have you removed unnecessary customer and payment data?
- Does a second person agree that the response says only what the records support?
- Have you recorded who owns the next step?
Keep the next assignment easier
The Restoration TPA Dispute prompt book helps teams sort job evidence, explain scope changes, and prepare clear review questions. For the broad process, read the scope and payment guide and the file-gap checklist. Then follow the workflow and use the companion templates to keep the records consistent.
Sources and limits
- Texas Department of Insurance, Working with an Insurance Adjuster
- Texas Department of Insurance, Roofing and Insurance: Know the Law (Texas-specific)
- California Department of Insurance, Residential Property Claims Guide (California consumer guidance)
- EPA, Mold Remediation in Schools and Commercial Buildings
- OSHA, A Brief Guide to Mold in the Workplace
Last reviewed: November 16, 2026. This article gives general documentation ideas, not legal, claim, coverage, or payment advice. Check the signed agreement and state rules for your specific job.
1 thought on “Restoration TPA Questions: 8 Checks Before Resubmitting a Scope”